esp32开发板烧录micropython后只能上载python代码的问题讨论
发表于 : 2022年 1月 14日 08:46
各位大佬们,最近看到arduino官方网站上的一篇文章,https://docs.arduino.cc/learn/programmi ... nmv-editor
他们提出,As MicroPython is already running on the board, we don't need to compile and upload the code, we only need to provide the instructions (which is done via serial communication).
When installing MicroPython on a board, it can only run MicroPython scripts, until we "uninstall" it. To put the board back in "normal mode" we need to reset the bootloader, which is a unique process for each board. These instructions are available in the compatible boards section in this article.
我理解的意思就是,烧录micropython图件就只能上载python类的文件,其他类的上传不了,除非卸载,但是arduino只要提供一个serial接口进行通信。
也不知道理解的对不对。
他们提出,As MicroPython is already running on the board, we don't need to compile and upload the code, we only need to provide the instructions (which is done via serial communication).
When installing MicroPython on a board, it can only run MicroPython scripts, until we "uninstall" it. To put the board back in "normal mode" we need to reset the bootloader, which is a unique process for each board. These instructions are available in the compatible boards section in this article.
我理解的意思就是,烧录micropython图件就只能上载python类的文件,其他类的上传不了,除非卸载,但是arduino只要提供一个serial接口进行通信。
也不知道理解的对不对。