- stm32/boards/LEGO_HUB_NO6: Set filesystem label as HUB_NO6.
- stm32/boards/NUCLEO_WB55: Fix LED ordering.
- tools/mpremote: Implement seek and flush in ioctl method.
- unix/Makefile: Use -Og instead of -O0 for debug builds.
- extmod/modure: Redirect regex debug printing to mp_printf.
- unix/coverage: Change remaining printf to mp_printf.
- all: Update Python formatting to latest Black version 21.12b0.
- esp32/machine_pwm: Implement duty_u16() and duty_ns() PWM methods.
- py/builtinimport: Refactor module importing.
- extmod/modbluetooth: Support gap_connect(None) to cancel a connection.
micropython更新:2021.12
- shaoziyang
- 帖子: 3965
- 注册时间: 2019年 10月 21日 13:48
micropython更新:2021.12
2021年12月更新
- shaoziyang
- 帖子: 3965
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.12
- extmod/network_ninaw10: Fix config of AP mode.
- rp2/machine_uart: Handle and clear UART RX timeout IRQ.
- esp32,esp8266: Extract qstr from object when comparing keys in config().
- lib/stm32lib: Update library for L4 v1.17.0, new G4, WL, and MMC fixes.
- stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
- stm32/main: Call sdcard_init when only MICROPY_HW_ENABLE_MMCARD enabled.
- stm32/sdcard: Support 8-bit wide SDIO bus.
- stm32/sdcard: Add config option to force MM card capacity.
- stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
- stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
- stm32/boards: Remove stray '+' characters at start of lines in ld files.
- tools/autobuild: Automatically build all esp32 boards.
- shaoziyang
- 帖子: 3965
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.12
- py/showbc: Fix printing of raw bytecode header on nanbox builds.
- tools/makemanifest.py: Make str conversion compatible with Python 2.
- esp32/machine_hw_spi: Set proper default SPI(id=2) pins on S2 and S3.
- esp32/boards: Remove SPI pin defaults from GENERIC S2/S3 boards.
- esp32/machine_hw_spi: Set proper default SPI(id=1) pins on S2,S3 and C3.
- esp32/machine_hw_spi: Fix SPI default pins reordering on ESP32-S2/S3.
- esp32/machine_pin: Make GPIO 26 usable for S2,S3 if SPIRAM not config'd.
- tools/upip.py: Support == to specify exact package version.
- docs: Remove trailing spaces and convert tabs to spaces.
- mimxrt: Tidy up the board flash related files.
- mimxrt: Define UART 0 on MIMXRT boards.
- mimxrt: Support selection of PHY type and address.
- mimxrt: Re-Enable eth checksum creation by HW.
- mimxrt: Fix a tiny unnoticed bug in sdcard.c.
- mimxrt: Add a driver for the DP83848 PHY device.
- mimxrt: Refactor the reading of the machine id.
- mimxrt: Enable ticks_cpu at boot time for NDEBUG builds only.
- mimxrt: Use -Og instead of -O0 for DEBUG builds.
- shaoziyang
- 帖子: 3965
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.12
- stm32/boards/OLIMEX_H407: Fix typo in OLIMEX H407 board.json.
- stm32/boards/make-pins.py: Generate empty ADC table if needed.
- stm32/qspi: Fix typo in address comment.
- stm32/factoryreset: Init vfs flags before calling pyb_flash_init_vfs.
- py/mpstate.h: Only include sys.path/argv objects in state when enabled.
- ports: Add '.frozen' as the first entry in sys.path.
- docs/library/sys.rst: Add note about '.frozen' as an entry in sys.path.
- py/runtime: Allow initialising sys.path/argv with defaults.
- py/mkrules.cmake: Set frozen preprocessor defs early.
- py: Only search frozen modules when '.frozen' is found in sys.path.
- teensy: Switch to use manifest.py instead of FROZEN_DIR.
- all: Remove support for FROZEN_DIR and FROZEN_MPY_DIR.
- tools/makemanifest.py: Merge make-frozen.py.
- py/modio: Remove io.resource_stream function.
- shaoziyang
- 帖子: 3965
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.12
- tools/mpremote: Add mkdir and rmdir to RemoteFS.
- esp32/machine_bitstream: Replace bit-bang code with RMT-based driver.
- esp32/machine_pwm: Keep duty constant when changing frequency.
- esp32/modnetwork: Synchronize WiFi AUTH_xxx constants with IDF values.
- tests/basics/int_big_cmp.py: Add more tests for big-int comparison.
- py/mpz: Fix bugs with bitwise of -0 by ensuring all 0's are positive.
- esp8266/etshal.h: Remove unneeded function declarations.
- stm32/boards/OLIMEX_H407: Fix typo in OLIMEX H407 board.json.
- shaoziyang
- 帖子: 3965
- 注册时间: 2019年 10月 21日 13:48
-
- 随机主题
- 回复总数
- 阅读次数
- 最新文章
-
- 8回复总数
- 2231 阅读次数
- 最新文章 由 joreason
2020年 12月 6日 23:48
-
- 1回复总数
- 1045 阅读次数
- 最新文章 由 shaoziyang
2020年 12月 6日 22:29
-
- 10回复总数
- 2930 阅读次数
- 最新文章 由 xiaoni
2020年 12月 7日 15:30