- rp2/boards: Add Pimoroni Tiny 2040.
- rp2/boards: Add Pimoroni Pico LiPo 16MB.
- rp2/boards: Add Pimoroni Pico LiPo 4MB.
- rp2/boards: Add Adafruit QT Py RP2040.
- rp2/boards: Add Adafruit ItsyBitsy RP2040.
- rp2/boards/SPARKFUN_THINGPLUS: Configure I2C/SPI default pins.
- rp2/boards/SPARKFUN_PROMICRO: Configure UART/I2C/SPI default pins.
- rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure I2C/SPI default pins.
- rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure custom VID/PID.
- rp2/tusb_port: Allow boards to configure USB VID and PID.
- py/builtinimport: Fix condition for including do_execute_raw_code().
- tools/autobuild: Add the MIMXRT1050_EVKB board to the daily builds.
- mimxrt/boards: Add support for the MIMXRT1050_EVKB board.
- mimxrt: Add support for Hyperflash chips.
- extmod/uasyncio: In open_connection use address info in socket creation.
- stm32/README.md: Update supported MCUs, and submodule and mboot use.
- stm32/Makefile: Update to only pull in used Bluetooth library.
- stm32/boards/LEGO_HUB_NO6: Add board definition for LEGO_HUB_NO6.
micropython更新:2021.8
- shaoziyang
- 帖子: 3967
- 注册时间: 2019年 10月 21日 13:48
micropython更新:2021.8
2021年8月更新
- shaoziyang
- 帖子: 3967
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.8
- nrf: Enable source line on tracebacks.
- nrf/modules/nrf: Add function to enable/disable DCDC.
- nrf/modules/uos: Add ilistdir to uos module.
- tools/codeformat.py: Include ports/nrf/modules/nrf in code formatting.
- nrf/boards: Enable MICROPY_VFS_LFS2 for all target boards.
- nrf/mphalport: Add dummy function for mp_hal_time_ns().
- nrf/Makefile: Set default manifest file for all targets.
- nrf/modules/scripts: Add file system formatting script.
- nrf/boards: Set FROZEN_MANIFEST blank when SD present on nrf51 targets.
- tools/ci.sh: Add mpy-cross build to nrf port.
- nrf: Facilitate use of freeze manifest.
- nrf/boards: Enable needed features for FAT/LFS1/LFS2.
- nrf/main: Add auto mount and auto format hook for internal flash FS.
- nrf/qstrdefsport.h: Add entries for in-built FS mount points.
- nrf/mpconfigport.h: Enable MICROPY_PY_IO_FILEIO when an FS is enabled.
- nrf/modules/uos: Allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2.
- nrf/Makefile: Add _fs_size linker script override from make.
- nrf/mpconfigport.h: Tune FAT FS configuration.
- nrf/README: Update README.md to reflect internal file systems.
- nrf/mpconfigport.h: Expose nrf module when MICROPY_PY_NRF is set.
- nrf/drivers: Add support for using flash block device with SoftDevice.
- nrf/modules/nrf: Add new nrf module with flash block device.
- nrf/boards/common.ld: Calculate unused flash region.
- stm32/powerctrl: Support changing frequency on WB MCUs.
- stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx.
- stm32/usbd_desc: Rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx.
- ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.
- docs/library/machine.I2S.rst: Fix use of sd pin in examples.
- py/mkrules: Automatically build mpy-cross if it doesn't exist.
- tests/extmod/ujson: Add tests for dump/dumps separators argument.
- extmod/modujson: Add support for dump/dumps separators keyword-argument.
- esp8266,esp32: Include hidden networks in WLAN.scan results.
- esp32/mpconfigport.h: Enable reverse and inplace special methods.
- esp32/boards: Add Silicognition wESP32 board configuration.
- esp32/machine_uart: Add flow kw-arg to enable hardware flow control.
- shaoziyang
- 帖子: 3967
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.8
- tests/multi_bluetooth/ble_subscribe.py: Add test for subscription.
- extmod/modbluetooth: Add send_update arg to gatts_write.
- stm32,esp32,rp2: Enable MICROPY_PY_FSTRINGS by default.
- py: Implement partial PEP-498 (f-string) support.
- tools/mpremote: Add "devs" shortcut for "connect list".
- tools/mpremote: Fix connect-list in case VID/PID are None.
- extmod/modlwip: Fix close and clean up of UDP and raw sockets.
- tests/run-multitests.py: Add broadcast and wait facility.
- tools/autobuild: Add auto build for Silicognition wESP32.
- nrf: Set .mpy features consistent with documentation and other ports.
- docs/library/index.rst: Clarify module naming and purpose.
- tools/gen-cpydiff.py: Don't rename foo to ufoo in diff output.
- docs: Replace ufoo with foo in all docs.
- docs: Rename ufoo.rst to foo.rst.
- docs/templates: Add unix and zephyr quickref links to top-index.
- docs/library/zephyr: Add libraries specific to the Zephyr port.
- docs/zephyr: Add quick reference for the Zephyr port.
- stm32/mbedtls: Fix compile warning about uninitialized val.
- stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI.
- rp2/CMakeLists.txt: Allow a board's cmake to set the manifest path.
- esp32/makeimg.py: Get bootloader and partition offset from sdkconfig.
- shaoziyang
- 帖子: 3967
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.8
- stm32: Disable computed goto on constrained boards.
- stm32/stm32_it: Support TIM17 IRQs on WB MCUs.
- tools/autobuild: Don't use "-B" for make, it's already a fresh build.
- stm32/Makefile: Allow GIT_SUBMODULES and LIBS to be extended.
- rp2/Makefile: Add "submodules" target, to match other ports.
- py/mkrules.mk: Do submodule sync in "make submodules".
- docs: Add docs for machine.bitstream and neopixel module.
- drivers/neopixel: Add common machine.bitstream-based neopixel module.
- esp8266: Replace esp.neopixel with machine.bitstream.
- esp32: Replace esp.neopixel with machine.bitstream.
- stm32: Add implementation of machine.bitstream.
- extmod: Add machine.bitstream.
- tools/mpremote: Remove support for pyb.USB_VCP in/out specialisation.
- py/lexer: Clear fstring_args vstr on lexer free.
- docs/library/network.rst: Simplify socket import.
- docs/library/builtins.rst: Add module title.
- tests/extmod/vfs_fat_finaliser.py: Ensure alloc at never-used GC blocks.
- unix/Makefile: Disable error compression on arm-linux-gnueabi-gcc.
- shaoziyang
- 帖子: 3967
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.8
- tools/pyboard.py: Make --no-soft-reset consistent with other args.
- tools/pyboard.py: Add --exclusive to match --no-exclusive.
- tools/pyboard.py: Make --no-follow use same variable as --follow.
- tools/pyboard.py: Move --no-exclusive/--soft-reset out of mutex group.
- extmod/modframebuf: Enable blit between different formats via a palette.
- esp32,esp8266: Remove dead code for end_ticks in machine_bitstream.
- shaoziyang
- 帖子: 3967
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.8
- tools/mpremote: Bump version to 0.0.6.
- tests/pybnative: Make while.py test run on boards without pyb.delay.
- javascript/Makefile: Change variable to EXPORTED_RUNTIME_METHODS
- tools/uncrustify: Force 1 newline at end of file.
- drivers/cyw43: Make wifi join fail if interface is not active.
- drivers/cyw43: Fix cyw43_deinit so it can be called many times in a row.
- stm32/boards/LEGO_HUB_NO6: Add make commands to backup/restore firmware.
- stm32/boards/LEGO_HUB_NO6: Skip first 1MiB of SPI flash for storage.
- stm32/boards/LEGO_HUB_NO6: Change SPI flash storage to use hardware SPI.
- stm32/storage: Make extended-block-device more configurable.
- esp32/boards: Add GENERIC_C3_USB board with USB serial/JTAG support.
- docs/reference: Mention that slicing a memoryview causes allocation.
- docs/esp8266: Use monospace for software tools.
- docs/library: Fix usage of :term: for frozen module reference.
- drivers/neopixel: Reduce code size of driver.
- drivers/neopixel: Optimize fill() for speed.
- rp2/mpconfigport.h: Allow boards to add root pointers.
- rp2/CMakeLists.txt: Add option to enable double tap reset to bootrom.
- rp2/rp2_flash: Disable IRQs while calling flash_erase/program.
- tests/basics: Split f-string debug printing to separate file with .exp.
-
- 随机主题
- 回复总数
- 阅读次数
- 最新文章
-
- 1回复总数
- 2673 阅读次数
- 最新文章 由 shaoziyang
2021年 12月 15日 11:46
-
- 9回复总数
- 1582 阅读次数
- 最新文章 由 qiuyu
2021年 12月 16日 09:47
-
- 1回复总数
- 2207 阅读次数
- 最新文章 由 shaoziyang
2021年 12月 16日 11:05