- docs/pyboard: Fix typo in pyb.Switch tutorial.
- docs: Fix some spelling mistakes.
- gitignore: Ignore macOS desktop metadata files.
- stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs.
- docs/esp8266: Clarify limitations of SSL in esp8266 and fix typos.
- docs/esp8266: Add instructions on entering programming mode manually.
- docs/esp8266: Add note about simultaneous use of STA_IF and AP_IF.
- rp2/tusb_port: Add the device unique-id to the USB id.
- rp2/boards: Add board definition for SparkFun Pro Micro board.
- rp2/boards: Add board definition for SparkFun Thing Plus RP2040.
- py/repl: Autocomplete builtin modules.
- py/repl: Refactor autocomplete, extracting reusable parts.
- py/repl: Refactor autocomplete to reduce nesting.
- py/repl: Enter four spaces when there are no matches.
- py/repl: Filter private methods from tab completion.
- py/scheduler: Add missing MICROPY_WRAP_MP_SCHED_EXCEPTION usage.
micropython更新:2021.5
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
micropython更新:2021.5
2021年5月更新
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- drivers/display/ssd1306.py: Add rotate method.
- esp32/esp32_rmt: Clear config struct before filling it out.
- docs/esp8266: Add WDT to quickref.
- docs/esp32: Add SDCard to quickref.
- docs/esp32: Add WDT to quickref.
- docs/esp32: Add UART to quickref.
- extmod/moductypes: Fix size and offset calculation for ARRAY of FLOAT32.
- extmod/moductypes: Replace numbers with macro constants.
- extmod/moductypes: Remove double blank lines and debugging printf's.
- extmod: Remove old comments used for auto-doc generation.
- unix/modffi: Use a union for passing/returning FFI values.
- rp2: Move manifest.py to boards directory.
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- rp2/CMakeLists.txt: Include tinyusb_common in PICO_SDK_COMPONENTS.
- esp32/boards/UM_TINYPICO: Fix include of sdkconfig fragment.
- esp32/boards: Add UM_FEATHERS2 and UM_TINYS2 board definitions.
- esp32/boards: Rename TINYPICO board to UM_TINYPICO.
- esp32: Extend support for S2 series, and S3 where applicable.
- tests/thread: Make exc1,exit1,exit2,stacksize1,start1 tests run on rp2.
- py/gc: Make gc_lock_depth have a count per thread.
- rp2/mpthreadport: Add mp_thread_deinit to reset core1 on soft reset.
- tests/thread: Make stress_aes.py test run on bare-metal ports.
- tests/thread: Make stress_create.py test run on esp32.
- esp32/mpthreadport: Use binary semaphore instead of mutex.
- esp32/mpthreadport: Don't explicitly free thread struct in TCB cleanup.
- docs/library: Add initial API reference for rp2 module and its classes.
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- lib/lwip: Switch to use GitHub mirror repo.
- py/objarray: Implement more/less comparisons for array.
- py/objarray: Prohibit comparison of mismatching types.
- tests/run-multitests.py: Flush stdout for each line of trace output.
- stm32/mboot: Make LEDs and reset-mode selection more configurable.
- stm32/mboot: Add MBOOT_LEAVE_BOOTLOADER_VIA_RESET option.
- stm32/boardctrl: Adjust logic for running boot.py, main.py.
- stm32/powerctrl: Add MICROPY_HW_ENTER_BOOTLOADER_VIA_RESET option.
- py/mkenv.mk: Don't emit info about BUILD_VERBOSE if it's set.
- docs/library/rp2.rst: Fix typo overriden->overridden.
- tests/run-perfbench.py: Fix native feature check.
- lib/utils: Add ARM semihosting utility functions.
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- mimxrt: Improve ticks and sleep functions using GPT.
- docs/library: Add a blank line to fix formatting for ussl docs.
- docs/library: Clarify what type of algorithm is implemented in heapq.
- nrf/boards: Add support for evk_nina_b3 board.
- nrf: Add machine.memXX, and allow boards to customise some features.
- py/nlrx64: Correct the detection of Darwin ABI.
- py/nlraarch64: Add underscore prefix to function symbols for Darwin ABI.
- py/objarray: Fix constructing a memoryview from a memoryview.
- py/objarray: Use mp_obj_memoryview_init helper in mp_obj_new_memoryview.
- tests/cpydiff: Add test and workaround for function.__module__ attr.
- esp32/boards: Fix spelling mistakes in comments for UM_xxx boards.
- esp32/boards: Set default I2C and SPI pins on UM_xxx boards.
- esp32/machine_i2c: Allow boards to configure I2C pins using new macros.
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- tools/ci.sh: Update zephyr docker image to v0.17.3.
- tools/pydfu.py: Remove default VID/PID values.
- stm32/mboot: Leave bootloader from thread mode, not from IRQ.
- stm32/uart: Configure pull-up only on RX and CTS, not TX and RTS.
- stm32/sdio: Fix case of SDIO DMA turning off mid transfer.
- py/emitnative: Fix x86-64 emitter to generate correct 8/16-bit stores.
- py/asmx64: Support use of top 8 regs in src_r64 argument.
- tools/mpy_ld.py: Support R_X86_64_GOTPCREL reloc for x86-64 arch.
- all: Replace busses with buses.
- stm32/boards: Add VCC_GND_F407ZG board.
- stm32/boards: Add VCC_GND_F407VE board.
- docs/library/pyb.Pin.rst: Update the arguments for Pin.init().
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- extmod/moduhashlib: Put hash obj in final state after digest is called.
- esp8266/boards/GENERIC_512K: Add custom manifest without FS modules.
- github/workflows: Add workflow to build and run unix port on MIPS.
- tests: Make float and framebuf tests skip or run on big-endian archs.
- tools/ci.sh: Build Cortex-A9 sabrelite board as part of qemu-arm CI.
- qemu-arm: Add support for Cortex-A9 via sabrelite board.
- tools/tinytest-codegen.py: Add command-line option to exclude tests.
- tools/mpy-tool.py: Support relocating ARMv6 arch.
- py/asmarm: Use builtin func to flush I- and D-cache on ARM 7 archs.
- mimxrt: Extend the Pin module for SoftI2C, SoftSPI support.
- github/workflows: Add CI workflow for mimxrt port.
- mimxrt: Enable built-in help.
- mimxrt: Implement machine.Pin class.
- lib/mbedtls: Switch to currently latest commit of LTS branch v2.16.
- tools/ci.sh: Use FROZEN_MANIFEST in an esp32 build to test feature.
- py/mkrules.cmake: Add MPY_LIB_DIR and BOARD_DIR to makemanifest call.
- shaoziyang
- 帖子: 3954
- 注册时间: 2019年 10月 21日 13:48
Re: micropython更新:2021.5
- esp32/espneopixel: Add support for GPIO32 and GPIO33.
- esp32/boards: Add M5STACK_ATOM board definition.
- docs/rp2: Add skeleton docs for the rp2 port.
- py/builtinimport: Change relative import's ValueError to ImportError.
- extmod/modurandom: Support an argument of bits=0 to getrandbits.
- extmod/modurandom: Add error message when getrandbits has bad value.
- tests/basics: Split out literal tests that raise SyntaxWarning on CPy.
- tests/extmod/btree_gc.py: Close the database to avoid a memory leak.
- py/repl: Don't read past the end of import_str.
- py/gc: Access the list of root pointers in an asan-compatible way.
- py/compile: Raise an error on async with/for outside an async function.
- tools/mpremote: Add new CLI utility to interact with remote device.
- tools/pyboard.py: Add "soft_reset" option to Pyboard.enter_raw_repl().
- tools/pyboard.py: Track raw REPL state via in_raw_repl variable.
- esp8266,esp32: Update manifest to point to new dirs in micropython-lib.
- stm32/boards/PYBD_SF2: Disable GCC 11 warnings for array bounds.
- stm32/boards/NUCLEO_L432KC: Fix FS size and enable LFS1 filesystem.
-
- 随机主题
- 回复总数
- 阅读次数
- 最新文章
-
- 7回复总数
- 1213 阅读次数
- 最新文章 由 zwjiang
2022年 3月 7日 09:15
-
- 1回复总数
- 794 阅读次数
- 最新文章 由 shaoziyang
2022年 3月 7日 09:16
-
- 1回复总数
- 1910 阅读次数
- 最新文章 由 shaoziyang
2022年 3月 7日 14:24